Location Of Plates, Table To Enter P.i.n. And Distributor; P.i.n. Plate Location; Engine Serial No. Plate Location - Komatsu Boss D87E-2 Operation & Maintenance Manual

INTRODUCTION

LOCATION OF PLATES, TABLE TO ENTER P.I.N. AND DISTRIBUTOR

LOCATION OF PLATES, TABLE TO ENTER P.I.N. AND DISTRIBUTOR
0

P.I.N. PLATE LOCATION

0
The product identification number (PIN) is stamped on a plate attached
to the front of the left console below the transmission controls. It is also
stamped into the right rear top of the rear main frame.

ENGINE SERIAL NO. PLATE LOCATION

0
The engine serial number is stamped in a plate on the left side of the
engine block.
TABLE TO ENTER NUMBERS AND DISTRIBUTOR
0
Machine P.I.N.:
Engine Serial No.:
Distributor Name:
Address:
Service personnel for your machine:
0-4
Phone:
D87E-2 D87P-2