When The Message "Remove Misfeed From Output Tray" Appears - Ricoh AP306 Printer Reference

Troubleshooting
C
When the misfed paper is in the
main section of the photoconduc-
tor unit, turn the dial downward
then remove it.
Confirm that you do not leave any
misfed paper in the printer.
Note
If it is difficult to turn the dial,
turn it slightly upward and then
try again.
4
D
Close the front cover.
When the Message "Remove
Misfeed From Output Tray"
Appears
Simplex printer
R CAUTION:
• When removing misfed paper,
do not touch the fusing section
because it could be very hot.
A
Open the paper exit cover.
60
Note
When opening the paper exit
cover, be careful as it may be
hot.
B
Push the front cover release but-
ton and open the front cover.
TFWX220E
C
Turn the dial downward, then re-
move the misfed paper in the
printer.
Note
When removing misfed paper,
be careful not to touch the fus-
ing section because it could be
very hot.
When you can see the misfed
paper inside the printer
Note
If it is difficult to turn the dial,
turn it slightly upward and then
try again.
TFWX230E
TFWX080E