Table of Contents
Advertisement
2. Tray Size[*]
You can select the size of the paper tray whenever you set the paper size dial
to "p".
• B4 JIS
• B5 JIS
• 8.5 5.5
• 8x13
• 8.25x13
• 8.5 13
• A5
Note
The paper size specified here is applied to all paper trays ( Tray 1, 2 and 3
excluding the bypass tray). You cannot select the paper size individually
for each tray.
A5 and Half Letter are supported only by Tray 1. If you select A5, Tray 2
and 3 ignore the setting, and the default paper size (8.5 13) will be selected
automatically. For more information about loading paper, see P.30 "Load-
ing Paper".
3. Bypass Use
You can select whether or not the printer should be searched the bypass tray
when "Auto Tray Select" is selected in "Paper Tray:" using the printer driver.
Selecting "Manual" is not searched the bypass tray.
The paper size setting selected with the printer driver overrides the one se-
lected with the operation panel.
• Manual
• Auto/Tray
Note
This item is available when the printer language is set to IPDL-C.
4. I/O Buffer
You can select the size of the I/O buffer. Normally it is not necessary to
change this setting.
• 16KB
• 32KB
• 64KB
• 128KB
• 256KB
• 512KB
Menu Settings
5
95
Advertisement
Table of Contents
