Table of Contents
Advertisement
Using the Operation Panel
Menu Settings
IPDL-C Menu
The following are the settings you can make with "IPDL-C Menu".
Note
Italicized settings indicate default settings.
1. Job Timeout
You can set how many seconds the printer waits before terminating a print
job when the printer does not receive the end of that print job. "000 Off" is
endless wait. The job is automatically cancelled if time runs out.
• 000 Off
• 1 to 999 seconds by 1
5
2. I/O Timeout
You can set how many seconds the printer waits for more print data before
ending its waiting condition for data and terminating a job. "000 Off" is end-
less wait. The job is automatically cancelled if no data is received for the se-
lected time.
• 000 Off
• 1 to 999 seconds by 1 (999 seconds)
RPS2 Menu
The following are the settings you can make with "RPS2 Menu". The settings
made with the printer driver normally take priority, except when a printer driv-
er setting is set to use the printer's settings.
Note
Italicized settings indicate default settings.
1.Color Level
You can select the number of colors used per dot to [1 bit] or [2 bit].
• 1 bit
• 2 bit
2.Color Mode
You can select either monochrome or color printing.
• Color
• Black & White
90
Advertisement
Table of Contents
