Deleting The User Code Record - Ricoh AP306 Printer Reference

C
Press {T} or {U} to display "Maintenance", and then press {Enter}.
<Menu>
Maintenance
The following message appears on the panel display.
<Maintenance>
1.Reinstall
D
Press {T} or {U} to display "8.Log Protect", and then press {Enter}.
<Maintenance>
8.Log Protect l
The following message appears on the panel display.
<Log Protect>
On
E
Press {T} or {U} to select "On" or "Off", and then press {Enter}.
<Log Protect>
Off
This registers the setting and returns to the "Maintenance" menu.
F
Press {On Line}.
The "Ready" message appears on the panel display.

Deleting the User Code Record

This procedure describes how to clear the User Code record.
Note
If "Log Protect" is set to "On", you can not delete the User Code record. Select
"Off" in "Log Protect", and then follow the procedure below.
ing the User Code Record"
A
Check if the On Line indicator stays on. If not, press {On Line}.
j
l
j
l
j
j
l
j
l
Administering Printing by User Code
P.108 "Protect-
5
109