Changing The Printer Language - Ricoh AP306 Printer Reference

Using the Operation Panel
32. IP Address – 39. Active PTL.
These items appear when the optional Network Interface Board is installed in
the printer.
Reference
the "Setup Guide" that comes with the printer

Changing the Printer Language

This section describes how to change the printer language on the operation pan-
el. Changing IPDL-C or RICOH-SCRIPT2 (RPS2) is required when you set the
menu for each printer language.
A
Press {Menu}.
5
The following message appears on the panel display.
<Menu>
IPDL-C Menu
B
Press {T} or {U} to display "Select PDL", and then press {Enter}.
<Menu>
Select PDL
C
Press {T} or {U} to display the printer language you want to use, and then
press {Enter}.
<Select PDL>
Option#1 RPS2 l
D
Press {On Line}.
The "Ready" message appears on the panel display.
Confirm that the selected printer language appears on the panel display.
98
On Line Reset Escape
Menu Media Enter
Power Error
Data In
j
l
j
l
j
TFWS020E