Table of Contents
Advertisement
E
Loosen the screws that hold the
photoconductor unit in the print-
er with the screw driver in the
new photoconductor unit's box.
The screws cannot be completely
removed from the photoconductor
unit.
F
Holding the green inset grips of
the photoconductor unit, pull the
top of the unit forward.
G
Holding the green inset grips of
the photoconductor unit, remove
the unit from the printer, and
place it carefully inside the new
photoconductor unit's box.
Important
To prevent accidental scattering
of toner, do not shake, rotate,
drop or hold the toner cartridge
upside down.
Note
Do not close the front cover re-
TFWX401E
moving the photoconductor
unit. Otherwise, you cannot re-
place the photoconductor unit
because the photoconductor
unit holder will be closed. If you
do this by mistake, return the
photoconductor unit holder to
its original position before re-
placing the photoconductor
unit.
TFWX250E
TYWX290E
Replacing Consumables
TFWX520E
TFWX300E
4
75
Advertisement
Table of Contents
