When The Message "Remove Misfeed From Output Tray" Appears - Ricoh AP505 Printer Reference

Troubleshooting
A
Open the front cover by pushing
the front cover release button.
B
If the paper is in the front side of
4
the photoconductor unit, careful-
ly pull it out.
Note
When removing misfed paper,
be careful not to touch the fus-
ing section because it could be
very hot.
C
When the misfed paper is in the
main section of the photoconduc-
tor unit, turn the dial downward
then remove the misfed paper in
the printer.
Make sure that you do not leave
any misfed paper in the printer.
Note
If it is difficult to turn the dial,
turn it slightly upward in the
opposite direction, and then try
again.
40
D
Close the front cover.
TFWX080E
When the Message "REMOVE
MISFEED FROM OUTPUT
TRAY" Appears
R CAUTION:
• When removing misfed paper,
do not touch the fusing section
because it could be very hot.
A
Open the paper exit cover.
Note
When opening the paper exit
cover, be careful as it may be
hot.
TFWX210E
TFWX220E
TFWX230E