Table of Contents
Advertisement
Paper and Other Media
C
Select the paper size you have
loaded in the tray.
Standard paper size
A Press {T} or {U} to display the
paper size that is in the tray.
B Press {Enter}.
<Bypass Size>
3
A5
The following message appears
on the panel display.
<Media>
2.Bypass Size l
Custom size paper
A Press {T} or {U} to display
"Custom".
B Press {Enter}.
<Bypass Size>
Custom
The following message appears
on the panel display.
<Custom>
jl/# Width 210mm
C Press {T} or {U} to change the
third (leftmost) digit of the pa-
per width, and then press {En-
ter}.
The pointer (l) moves to the
right.
<Custom>
jl/# Width 110mm
34
j
l
j
j
l
l
l
Note
Press {Escape} to move the
pointer to the left.
Press {Escape} while the
pointer is located at the left-
most digit of the width to
cancel the settings and return
to step D.
D Repeat step C to set the value of
the width.
While the pointer is located at
the first (rightmost) digit of the
width, press {Enter} to advance
to the length setup display.
Note
Press {Escape} while the
pointer is located at the left-
most digit of the width to re-
t u r n t o t h e w i d t h s e t u p
display.
E Repeat steps C and D to set the
value of the length.
While the pointer is located at
the first (rightmost) digit of the
length, press {Enter} to return to
"Media".
<Media>
2.Bypass Size l
F Press {Escape}.
The "Ready" message appears
on the panel display.
IPDL-C
Ready
j
Advertisement
Table of Contents
