When The Message "Open Front Cover Remove Misfeed" Appears - Ricoh AP306 Printer Reference

Note
If the printer has the optional
paper feed unit installed, check
the all paper trays for misfeeds.
B
Slide the paper tray completely
into the printer.
Important
Be sure to insert the paper tray
completely. If not fully inserted,
misfeeds might occur, or the
front cover might touch the pa-
per tray.
C
Open the front cover, and then
close it to reset the misfeed condi-
tion.
Bypass tray
A
Carefully pull out the misfed pa-
per.
Confirm that you do not leave any
misfed paper in the printer.
B
When paper is left in the bypass
tray, remove the paper.
C
Close the bypass tray, open the
front cover, and then close it to re-
set the misfeed condition.
D
Reload paper into the bypass tray.
When the Message "Open
Front Cover Remove Misfeed"
Appears
R CAUTION:
• When removing misfed paper,
do not touch the fusing section
because it could be very hot.
A
Push the front cover release but-
ton and open the front cover.
B
If the misfed paper is in the front
of the photoconductor unit, care-
fully pull it out.
Note
When removing misfed paper,
be careful not to touch the fus-
ing section because it could be
very hot.
TFWY180E
Removing Misfed Paper
TFWX080E
TFWX210E
4
59