Setting The Toner Empty Menu - Ricoh AP306 Printer Reference

Troubleshooting
The following message appears on
the panel display.
<Maintenance>
1.Reinstall
D
Press {T} or {U} to display
"3.Toner Level", and then press
{Enter}.
<Maintenance>
3.Toner Level l
The following message appears on
4
the panel display.
<Toner Level>
Cyan
E
Press {T} or {U} to display "Ma-
genta", and then press {Enter}.
The following message appears on
the panel display.
<Magenta>
-<-----g----->+
F
Press {U} or {T} to adjust the
toner density, and then press {En-
ter}.
The "Toner Level" menu appears.
Note
To make the image density
darker, press {U U } to move the g
symbol to the right. To make it
lighter, press {T T } to move the g
symbol to the left.
G
Press {On Line}.
The "Ready" message appears on
the panel display.
68

Setting the Toner Empty Menu

Use this setting to specify whether the
j
printer stops printing and displays an
l
error message when toner runs out.
By default it does not, but you can
change this by carrying out the fol-
lowing procedure.
A
Turn on the printer's power
switch.
j
B
Press {Menu}.
j
l
The following message appears on
the panel display.
jl/#
C
Press {T} or {U} to display
"Maintenance", and then press
{Enter}.
The following message appears on
the panel display.
D
Press {T} or {U} to display
"5.Toner Empty", and then press
{Enter}.
On Line Reset
Menu Media
Power Error
<Menu>
IPDL-C Menu
<Menu>
Maintenance
<Maintenance>
1.Reinstall
<Maintenance>
5.Toner Empty l
Escape
Enter
Data In
TFWS020E
j
l
j
l
j
l
j