Table of Contents
Advertisement
Message
Reset Paper Tray
Correctly
Reset Waste T
Bottle Correctly
Warming Up
Waste T Full
(on the lower line)
Waste Toner is
Full
A3:Error
A6:Error
AB:Error
Description
The paper tray is not in-
stalled correctly.
The tray on the paper feed-
ing path was not set cor-
rectly when the printer
received the print job.
The waste toner bottle is
not installed.
The printer is preparing for
printing.
The printer adjusts itself
regularly to maintain print
quality. (This message
might appear while print-
ing.)
The waste toner bottle is
nearly full.
The waste toner bottle is
full.
There is too much data for
the I/O buffer to handle.
There is not enough printer
memory to print one or
more of the pages in the
print job.
The printer is unable to
process the data you are
trying to print.
Error & Status Messages
Comments
Install the paper tray cor-
rectly.
Install the paper tray cor-
rectly. The printer will re-
start printing
automatically.
Install the waste toner bot-
tle.
P.78 "Replacing the
Waste Toner Bottle"
Wait until the printer is
warmed up.
It is not an error message.
The printer is working
properly. Just wait a while.
Replace the waste toner
bottle.
P.78 "Replacing
the Waste Toner Bottle"
Replace the waste toner
bottle.
P.78 "Replacing
the Waste Toner Bottle"
Check if the interface cable
is inserted into the printer
and the computer securely.
Check if the interface cable
is not damaged or broken.
Increase the size of the I/O
buffer.
P.83 "Using the
Operation Panel"
See P.118 "Low Memory".
Install optional memory
unit to increase the amount
of printer memory.
Reduce the amount of data
being sent to the printer.
4
41
Advertisement
Table of Contents
