Fixed Displays; Circles, Arcs, Sectors, Polylines, Polygons, Rectangles - Omron NT31 Operation Manuals

Fixed Displays

7-4

Fixed Displays

Reference: The Support Tool also includes image data and library data as fixed display ele-
7-4-1

Circles, Arcs, Sectors, Polylines, Polygons, Rectangles

(Fixed Displays)
[Function Outline]
"Fixed displays" are graphics and text that are always displayed on the screen and
do not change. This section gives details of fixed displays.
There are the following types of fixed display.
S Text
Page 310
S Circle Page 301
S Arc Page 301
S Sector
Page 301
S Polyline Page 301
S Polygon
Page 301
S Rectangle Page 301
S Tiling
Page 313
S Mark
Page 315
ments, but since these are functionally different, they are dealt with separately in
this manual. For details on image and library data, refer to 7-5 "Image and Library
Data" (page 319).
These are graphics that are always displayed. Standard, inverse, flash, and in-
verse flash displays are possible depending on the graphics.
Since fixed display graphics are always displayed in the order in which they were
created at the Support Tool (graphics created early are overlaid by those created
later), the order must be considered when creating them. However, the order of
display within a fixed display graphic can be changed using the Support Tool.
Circle
Polyline
* A continuous straight line
with up to 254 intermediate
points can be drawn.
Arc
Polygon
* A polygon with up to
255 vertices can be
drawn.
Section 7-4
Sector
Rectangle
301