Omron NT31 Operation Manuals page 589

Commands/Responses
Response
[Format]
[Function]
Example:
578
Only if "Yes" is set for the "Response" memory switch, the response indicated be-
low is returned on normal completion.
[ESC] W M
1B 57 4D 30
s , s : Check sum (2 hexadecimal digits)
1 2
This is always added (fixed as "1FH").
S Writes the data of the specified number of words starting from the specified word
in the PT memory.
S The result after executing the specified operation (write attribute) on the present
contents of the PT memory and the written data is written is as follows.
S A maximum of 50 words can be written at one time.
The write attribute specified by a command executes the following operation on
the present data of the PT memory and the written data and writes the result.
S SET attribute : Specified data is written as it is regardless of the present
S AND attribute : The result after executing the AND operation on the
S OR attribute
: The result after executing the OR operation on the present
S XOR attribute : The result after executing the XOR operation on the
Write attribute Written data
SET attribute 1234
AND attribute 1234
OR attribute 1234
XOR attribute 1234
0 0 s1 s2
30 31 46
data of PT.
present data of the PT and the written data is written.
data of the PT and the written data is written.
present data of the PT and the written data is written.
Present data of the PT memory
H
H
H
H
Section 9-3
[CR]
0D
3456
H
3456
H
3456
H
3456
H
Result
1234
H
1014
H
3676
H
2662
H