Omron NT31 Operation Manuals page 398

Graphs
Reference: If a small value is set for "Interval Type", even if "broken line", "1-dot chain line", or
Settings (properties of each broken line)
*2
100% (Specify 100% value using either of "Table Entry" or "Value".)
Table Entry Numeral memory table number checked to find the 100% value
for percentage calculations
@ Designate the number of the numeral memory table that
Value Checked to find the 100% value for percentage calculations
@ Designate the 100% value (default: 100)
*2
0% (Specify 0% value using either of "Table Entry" or "Value".)
Table Entry Numeral memory table number checked to find the 0% value for
percentage calculations
@ Designate the number of the numeral memory table that
Value Checked to find the 0% value for percentage calculations
@ Designate the 0% value (default: 0)
−100%
*2
(Specify –100% value using either of "Table Entry" or "Value".)
Numeral memory table number checked to find the −100% value
Table Entry
for percentage calculations
@ Designate the number of the numeral memory table that
Checked to find the −100% value for percentage calculations
Value
@ Designate the −100% value (default: −100)
*1 When making the setting, ensure that the total of the Start Table Entry and No. of
Points does not exceed the maximum table entry.
*2 The −100% value, 0% value, and 100% value must comply with the following
relationship:
−100% value < 0% value < 100% value
Note that either "Table Entry" or "Value" should be set for each value, not both.
The choice of "Table Entry" or "Value" setting can be made independently for each
value.
The line thickness for broken line graphs is fixed as 1 dot.
"2-dot chain line" is specified the line will appear to be a solid line.
stores the 100% value.
Range: 0 to 1999
Range: −2147483648 to 2147483647
stores the 0% value.
Range: 0 to 1999
Range: −2147483648 to 2147483647
stores the −100% value.
Range: 0 to 1999
Range: −2147483648 to 2147483647
Section 7-10
387