Omron NT31 Operation Manuals page 431

Inputting Numeric Values
420
Settings
Table Entry Number of the numeral memory table into which the input
numeric value is written
Display Type Display format for the numeric value ("Input numeric value
and stored data", page 421)
Format ("Number of digits displayed", page 421)
Integer Number of digits in the integer part of
the numeric value
Decimal Number of digits in the decimal
fraction of the numeric value
Limit ("Upper/lower (max./min.) limit check", page 424)
Maximum Upper limit for numeric values that can be input
Minimum Lower limit for numeric values that can be input
Zero Suppression Whether or not zero suppression is used ("Zero
suppression", page 361)
Display Sign Whether or not negative numbers are indicated (setting
ineffective if "Hexadecimal" has been set for "Display
Format") ("Input numeric value and stored data", page 421)
Focus Frame Presence/absence of a frame indicating that the numeral
setting input field has become ready to accept input
Focus Attribute Display status before the input numeric value is confirmed
("Display attributes and drawing result", page 359)
Position
Foreground color
123456
Background color
Range: 0 to 1999
Decimal/Hexadecimal
Range: 1 to 10
Range: 0 to 9
Check mark (zero suppression used)/
No check mark (zero suppression not used)
Check mark (negative numbers indicated)/
No check mark (negative numbers not indicated)
Check mark (frame present)/
No check mark (frame not present)
Standard/Inverse/Flash/Inverse Flash
Section 7-12
Maximum combined Maximum combined
total of 10 digits