Recommended Connectors, Cables, And Crimp Terminals - Omron NT31 Operation Manuals

Connecting to the Host's RS-232C Port
5-1-4

Recommended Connectors, Cables, and Crimp Terminals

110
S Connectors and cables recommended for RS-232C
When making an RS-232C connecting cable, as far as possible use the recom-
mended parts indicated in the table below. Some units come supplied with one
connector and connector hood.
Check the required parts and prepare them in advance.
Name Model
XM2A-0901
Connector
XM2A-2501
DB-25P
XM2S-0911
XM2S-0913
Connector
XM2S-0911-E
hood
XM2S-2511
DB-C2-J9
AWG28 5P
IFVV-SB
Cable
CO-MA-VV-SB
5P 28AWG
S Cables with connectors made by OMRON
When connecting an NT-AL001 and a PC, use the OMRON cables with connec-
tors indicated in the table below.
Model Cable Length
XW2Z-200S
XW2Z-500S
XW2Z-200T
XW2Z-500T
Remarks
9-pin type
Made by OMRON
25-pin type
Made by OMRON
25-pin type
Made by JAE
9-pin type
Made by OMRON
Made by OMRON 9-pin
Made by OMRON 9-pin
25-pin type
Made by OMRON
25-pin type
Made by JAE
Multi-core shielded cable
Made by Fujikura, Ltd.
Multi-core shielded cable
Made by Hitachi, Ltd.
9-pin ⇔ 25-pin 9-pin ⇔ 25-pin
2 m
Host link, NT link (1:1)
5 m
9-pin ⇔ 9-pin 9-pin ⇔ 9-pin
2 m
5 m
Host link, NT link (1:1)
Section 5-1
Delivered with
CS1-series CS1G/H
C-series CQM1, C200HS,
C200HX/HG/HE(-ZE)
CVM1/CV-series CPUs
CV500-LK201
C500-LK203
3G2A5-LK201-EV1
C200H-LK201-V1
3G2A5-LK201-EV1
3G2A6-LK201-EV1
C-series CQM1, C200HS,
C200HX/HG/HE(-ZE)
CVM1/CV-series CPUs
CV500-LK201
CS1 series CS1G/CS1H
C500-LK203
3G2A5-LK201-EV1
C200H-LK201-V1
3G2A5-LK201-EV1
3G2A6-LK201-EV1
Connector Specification