Connection Method; Method Of Use - Omron NT31 Operation Manuals

Programming Console Function
6-12-2

Connection Method

For CQM1, C200HX/HG/HE(-ZE), SRM1
For CPM1
For CS1G/CS1H
6-12-3

Method of Use

For CS1G/CS1H
244
The connection method is exactly the same as for the NT link (1:1). Make the con-
nection to the PC by referring to Section 4 "Connecting to the Host from the
RS-232C Port".
The connection method is the same as for the NT link (1:1). Connect the RS-232C
cable to the peripheral port via an RS-232C converting adapter (CPM1-CIF01).
Make the connection to the PC by referring to Section 4 "Connecting to the Host
from the RS-232C Port".
The connection method is exactly the same as for the NT link (1:N). Make the con-
nection to the PC by referring to Section 4 "Connecting to the Host from the
RS-232C Port".
The programming console function can be used only when the PT side unit num-
ber is "0" and only one unit is connected. In addition, this function cannot be used
simultaneously at the CPU built-in RS-232C port and a peripheral port.
The connection method is exactly the same as for the NT link (1:N). Make the con-
nection to the PC by referring to Section 4 "Connecting to the Host from the
RS-232C Port".
The programming console function can be used only when the PT side model
number is "0" and only one unit is connected. In addition, this function cannot be
used simultaneously at the CPU built-in RS-232C port and a peripheral port.
Only the points of difference with an actual programming console are described
here. For details on using the NT31/NT31C as a programming console, refer to
the instruction manual for the programming console (C200H-PRO27-E).
Section 6-12