Omron NT31 Operation Manuals page 277

Programmable terminal
Hide thumbs Also See for NT31:
Table of Contents

Advertisement

Areas for Control/Notification
Allocated Words of the PT Status Control Area
Symbol
C Series PCs
DM
Data memory
CH
I/O relay
TIM
Timer present value
CNT
Counter present value
HR
Holding relay
AR
Auxiliary relay
LR
Link relay
EM
EM Current Bank
Functions of the PT Status Control Area
266
The PT status control area (host ↔ NT31/NT31C) can be allocated to the following
host (PC) areas.
Allocation
CVM1/CV Series PCs
3
Data memory
3
I/O relay
Timer present value
Counter present value
3
3
Special auxiliary relay
3
3
*1 *2
EM Current Bank
*1 : EM (Extended data memory) of C series is available only with C200HX/HG/HE (–Z).
*2 : Only current bank can be allocated for EM (Extended data memory).
Since the special auxiliary relays of the CVM1/CV series PCs are all allocated to
system functions, they cannot be used for purposes other than system use.
The range of each memory area differs according to the PC type. refer to APPEN-
DIX L "PC Memory Map", page 684.
S Screen switch setting
Data is written to the "screen switch setting" word from both the NT31/NT31C
and the host. The meaning of the data differs according to whether it is written
from the NT31/NT31C or the host. However, if the NT31/NT31C is currently op-
erating, the number of the screen displayed is always written to the "screen
switch setting" word.
- When data is written from the host
To switch the screen displayed at the NT31/NT31C by an instruction from the
host, write the screen number, as a 4-digit BCD or hexadecimal value, to the
"screen switch setting" word. Whether the value is expressed in BCD or hexa-
decimal is determined by the setting for numeral storage type in the PT config-
uration settings made with the Support Tool.
NT31/NT31C
Designated screen
Allocation
CS1 Series PCs
3
Data memory
3
I/O relay
Timer present value
Counter present value
Holding relay
Special auxiliary relay
n
*2
EM Current Bank
3: OK
: NG
PC
PT status control area
Screen switch setting
Copy memory
table setting
PT status control setting
Reserved for system use
Section 7-2
Allocation
3
3
3
*2
n: Host link not available
← Screen number

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nt31c

Table of Contents