Omron NT31 Operation Manuals page 362

Touch Switches
Reference
S Copy key function
This function is used to copy the data or constants in a memory table to another
memory table or an input field. It is useful for setting numeral/character string
displays to their initial state, and for inputting the same contents (e.g. initial val-
ues) into multiple numeral/character string setting input fields.
Copying is possible between the following combinations.
Copy Source
Numeral memory table
Character string memory table
Constant
- It is also possible to copy between memory tables by operation with the PT sta-
tus control area.
- If the contents of a numeral/character string memory table have been changed
by operation at the NT31/NT31C such as use of the copy key the change is noti-
fied to the PT status notify area at the host.
The attributes for the copy key are as follows.
Settings
Copy From
Type
Memory Table
Number/Fixed
Value
Copy To
Type
Memory Table
Number
Numeral memory table
Numeral setting input field
Character string memory table
Character string input field
Numeral memory table
Numeral setting input field
Type of copy source
Numeral Table
String Table
Code
Copy source memory table number, or value if a constant
⋅ For a numeral/character string memory table
0 to 1999
⋅ For a constant
#2147483648 to 2147483647
Type of copy destination
Numeral Table
String Table
Cursor Position (numeral/character string input field)
Memory table number of the copy destination (setting
ineffective if "Cursor Position" is set for "Copy To")
0 to 1999
Section 7-7
Copy Destination
351