Recommended Connector Cables - Omron NS Series Setup Manual

4-4 Recommended Connector Cables

4-4 Recommended Connector Cables
Always use recommended connectors, connector hoods, and cables, where possible, when
making connector cables. Depending on the Unit, a connector and connector hood may be
included with the Unit.
Check the required components before preparing them.
Name
Connector
Connector
Hood
Cable
Note
• OMRON Cables with Connectors
The following OMRON Cables with Connectors can be used.
Model
XW2Z-200T
XW2Z-500T
XW2Z-200T-2
XW2Z-200T-5
• OMRON RS-232C/RS-422A Converter
Model
NS-AL002
CJ1W-CIF11
The connectors for the connecting cables are not included with the PT and must be
purchased separately.
4-24
Model
9-pin type
XM2A-0901
made by OMRON.
25-pin type
XM2A-2501
made by OMRON.
9-pin type
XM2S-0911 made by OMRON.
(mm screws)
9-pin type
XM2S-0911-E
made by OMRON.
9-pin type
XM2S-0913 made by OMRON.
(inch screws)
25-pin type
XM2S-2511
made by OMRON.
AWG28 × 5P
Multiconductor shielded cable
IFVV-SB made by Fujikura Densen, Ltd.
CO-MA-VV-SB Multiconductor shielded cable
5P × 28AWG
made by Hitachi Densen, Ltd.
The connector's tensile load is 30 N max. Do not subject the connectors to a load greater
than that specified.
Cable length
2 m
5 m
2 m
5 m
Connection method
Connects directly to
RS-232C port.
Connects directly to
RS-232C port.
Units with the connectors and
Details
CS/CJ Series
C-series CQM1 and C200HS
C200HX/HG/HE(-Z)
CVM1/CV-series CPU Units
CV500-LK201
CV500-LK201
C200H-LK201-V1
C-series CQM1 and C200HS
C200HX/HG/HE(-Z)
CVM1/CV-series CPU Units
CV500-LK201
CS/CJ Series
CV500-LK201
C200H-LK201-V1
Connector specifications
9-pin-to-9-pin
9-pin-to-CPM2C peripheral port
Terminal block specifications
8-pole terminal block (1:N NT Link)
5-pole terminal block (1:N NT Link)
connector hoods included.