Table of Contents
Advertisement
Troubleshooting
Removing Misfed Paper
If a paper misfeed occurs, an error
message appears indicating the loca-
tion of the misfed paper on the panel
display. This printer has the auto-re-
covery function, by which misfed pa-
per is sent to the Standard Tray or
Right Cover. Usually, you can re-
move the misfed paper easily with
this function.
Detaching the 2 Tray Finisher
4
There are times when you might have
to detach the 2 Tray Finisher from the
printer to remove misfed paper. This
section describes how to detach the 2
Tray Finisher.
A A A A
Hold the handle at the top of the 2
Tray Finisher firmly with one
hand, pull the 2 Tray Finisher
straight out, and let go when it
stops.
The 2 Tray Finisher is detached
from the printer.
88
B B B B
Use both hands to push it straight
back in, and let go when it clicks
into place.
The 2 Tray Finisher is reattached to
the printer.
Important
❒ Attach the 2 Tray Finisher to the
printer after closing the Duplex
Reversal Unit.
ZDJP201J
ZDJP202J
Advertisement
Table of Contents
