Table of Contents
Advertisement
When the Front Cover Does Not Close
When "Close Front Cover" appears on
the panel display, even if the cover
seems to be closed properly, it is not.
Close
Front Cover
When the front cover does not close,
confirm that the Transfer Unit is at-
tached firmly.
The Transfer Unit is attached to the
position shown in the illustration.
A A A A
Turn off the power switch and
unplug the power cable.
B B B B
If the light brown lever is in the
position shown in the illustra-
tion, turn it counterclockwise.
5. Appendix
C C C C
Push in the Transfer Unit until it
stops.
Confirm that the protrusion inside
the printer is in the upper left hole
of the Transfer Unit.
ZDJH995J
D D D D
Turn the light brown lever clock-
wise.
ZDJH014E
ZDJH999J
ZDJH992J
ZDJH020E
103
Advertisement
Table of Contents
