Table of Contents
Advertisement
Paper and Other Media
• Make the printer driver's setting for rotating the print image by 180 de-
grees. For details, see the Help file for the printer driver.
• Confirm that there is no air in the envelopes before loading.
• To get better print quality, it is recommended that you set the right, left,
top, and bottom print margin, to at least 15 mm (0.6") each.
• Do not print on both sides of envelopes.
• Load only one size and type of envelopes at the same time.
• Before loading envelopes, flatten the leading edges (the side being fed into
the printer) of them by running a pencil or ruler across them.
3
• Before loading envelopes, confirm that they are rectangular in shape.
• Supported size of envelope is listed on p.47 "Paper and Other Media".
❖ ❖ ❖ ❖ Paper not supported by this printer
Avoid using the following types of paper that are not supported by this print-
er:
• Paper meant for an ink-jet printer
• Bent, folded, or creased paper
• Curled or twisted paper
• Torn paper
• Wrinkled paper
• Damp paper
• Paper that is dry enough to emit static electricity
• Paper that has already been printed onto, except a preprinted letterhead
• Coated paper
• Special paper, such as thermal paper, aluminum foil, carbon paper and
conductive paper
• Paper whose weight is heavier or lighter than the limitation.
• With windows, holes, perforations, cutouts, or embossing
• Label paper on which glue or base paper is exposed
• Paper with clips or staples
56
Advertisement
Table of Contents
