Troubleshooting
Removing Jammed Staples
When "Add Staples " appears on the
panel display, or when the printer
does not staple even after it is in-
structed to, the staples might be
jammed.
Add Staples
A A A A
Open the front cover for the 2
Tray Finisher.
4
The stapler is attached to the posi-
tion shown in the illustration.
B B B B
Remove the cartridge by pulling
the green knob in the direction of
the arrow.
98
C C C C
Open the face plate of the car-
tridge to unlock it.
D D D D
Remove the jammed staples.
ZDJP216J
E E E E
Close the face plate of the car-
tridge until it clicks into place.
ZDJP217J
ZDJP227J
ZDJP228J
ZDJP229J