Table of Contents
Advertisement
B Press { { { { U U U U } } } } or { { { { T T T T } } } } to display the
"Adjustment", and then press
{ { { { Enter} } } } .
Registration:
Adjustment
C Press { { { { U U U U } } } } or { { { { T T T T } } } } to display the
tray to adjust, and then press
{ { { { Enter} } } } .
Adjustment:
Vert.: Tray 3
D Press { { { { U U U U } } } } or { { { { T T T T } } } } to set the digit
of the registration value (mm).
Vert.: Tray 3:
(-5.0 +5.0) 0
Note
❒ Increase the value to shift the
print area in a positive direc-
tion, and decrease to shift in a
negative direction.
Printable area
❒ Pressing { { { { U U U U } } } } or { { { { T T T T } } } } makes
the value increase or de-
crease by 1.0 mm step.
E Press { { { { Enter} } } } .
F Press { { { { Escape} } } } .
The current setting is displayed
for 2 seconds, and then the
printer returns to the previous
menu.
F F F F
Print the test sheet to check the
settings you have made.
G G G G
Press { { { { On Line} } } } .
"Ready " appears on the panel dis-
play.
Feed Direction
ZDJX900J
Adjusting the Registration of the Trays
Ready
2
45
Advertisement
Table of Contents
