Table of Contents
Advertisement
Error & Status Messages on the Control
Panel
❖ ❖ ❖ ❖ Status Messages
Messages/Second messages
Calibrating...
Energy Save Mode
Hex Dump Mode
Loading Toner...
Offline
Initializing... Please Wait
Printing...
Processing...
Ready
Resetting Job...
Waiting...
Warming Up...
❖ ❖ ❖ ❖ Alert Messages
Messages/Second messages
Add Staples
Add Toner/Yellow/Magen-
ta/Cyan/Black
Add Toner Black
4. Troubleshooting
Description
The printer is calibrating the
color.
In Energy Save Mode Level 2. No action required.
In Hex Dump Mode.
The printer is loading the ton-
er.
The printer is offline and can-
not print data.
The printer is initializing the
development unit.
The printer is doing print job.
Print data is being processed.
The default ready message.
The printer is ready to use.
Job is being reset.
The printer is waiting for the
next data to print.
The printer is warming up
and not ready.
Description
The stapler is out of staples.
Job is not stapled.
The printer is out of the indi-
cated toner(s).
The printer is out of toner (K). Replace a new toner cartridge
Solution
Wait for a while.
No action required.
Wait for a while.
Press { { { { On Line} } } } .
Wait for a while.
Wait for a while.
Wait for a while.
No action required.
Wait for a while.
Wait for a while.
Wait until the printer signals
Ready.
Solution
Replace new staples.
See p.100 "Adding Staples".
Replace a new toner cartridge
of the indicated color(s).
See p.1 "Replacing Consuma-
bles and Maintenance Kit".
(K).
See p.1 "Replacing Consuma-
bles and Maintenance Kit".
69
Advertisement
Table of Contents
