REMOVING JAMMED STAPLES
When "
Check Staple Unit" is displayed, staples are jammed in the
optional finisher. Follow these steps to solve the problem.
?I
WARNING: Since some parts of the finisher are supplied with
After loading a new staple cartridge, staples might not be ejected the first few
times you try to use the stapler.
1
Open the front door of the op-
tional finisher.
2
You can find a sticker (with
the top) explaining how to re-
move jammed staples, inside the
front door as shown in the illus-
tration.
3
Remove jammed staples follow-
ing the instructions on the sticker.
36
REMOVING JAMMED STAPLES
high electrical voltage, touch only the parts speci-
fied in the instructions on the sticker inside the fin-
isher's cover.
at