When "
Check Staple Unit" is displayed, staples are jammed in the
optional finisher. Remove jammed staples as follows:
?I
WARNING:
After loading a new staple cartridge, staples might not be ejected the first few
times you try to use the stapler.
1
Open the front door of the op-
tional finisher.
2
You can find a sticker (with
the top) explaining how to re-
move jammed staples, inside the
front door as shown in the illus-
tration.
3
Remove jammed staples follow-
ing the instructions on the sticker.
REMOVING JAMMED STAPLES
Since some parts of the finisher are supplied with
high electrical voltage, touch only the parts specified
in the instructions on the sticker inside the finisher's
cover.
REMOVING JAMMED STAPLES
at
125