Adjusting The Image Position - Ricoh PRIPORT VT2130 Operating Instructions Manual

5.
Adjusting the Image Position
If the image
position is not Correct, acfjust
before you start printing.
- Shifting the image position forward
t
1 t I
1 1 L I
- Shifting the image position backward
1. Press the left
Image Position
key.
When you shift the image forwards, leave
a margin (more than 10 mm/O.40") at the
leading edge.
2. Press the
Proof
key.
Check the
image position again.
+2 +1
o –'l
–2
1. Press the right
Image Position
key.
2. Press the Proof key. Check the
image position again.
Note:
The left and right
Image Position
keys
shift the image about 1mm/O.04° each
time they are pressed.
When the indicator changes from O to + 1
(-1 ), the image position shifts about
10mm/O.40" (-10mm/PO.40").
19