3. Master Roll Replacement
I
1. Open the original table.
Lift the original table release lever and
slide the original table to the " Y " mark.
2. Lift the pressure
release lever in the
direction
of the arrow to release the
feed roller pressure.
3. Remove the used master roll and pull
out
both
spools.
Thenj
insert
both
spools
into a new master roll (Type
VT-s).
.
When the Master End indicator lights, it is
necessary to replace the master roll even
if some paper remains on the old roll.
4. The new master
roll must
be posi-
tioned as shown in the illustration.
38