Table of Contents
Advertisement
Adjusting the Print Image Position
You can adjust the print image posi-
tion in two ways:
❖ Forwards or Backwards
Use the {Image Position} keys.
❖ Right or Left
Use the side tray fine adjusting dial.
Forwards or Backwards
* Paper feed direction
A
Press the left {Image Position} key
to move the image forwards, the
right key to move it backwards.
Note
❒ One push of either {Image Posi-
tion} key shifts the image posi-
tion by 0.5mm, 0.02" , up to a
maximum of 15mm, 0.6" in each
direction.
❒ When you shift the image for-
wards, leave a margin of more
than 5mm, 0.2" on the leading
edge. If there is no margin, pa-
per might wrap around the
drum and cause a misfeed.
B
Press the {Proof} key to check the
image position.
GRFORW0E
ZLKS040E
Adjusting the Print Image Position
1
ZLKS031E
23
Advertisement
Table of Contents
