When The Supply/Exchange ~); Indicator Lights - Ricoh PRIPORT VT2130 Operating Instructions Manual

3. When the Supply/Exchange (fi) Indicator Lights
1.
2.
Set the original.
Input the number of
pfints using the Num-
ber keys,
3. Press the Master
Making key.
1. Load paper on the
2.
paper feed table. (See
page 36.)
When the paper
end occurs during
a printing run,
press the Print Start
key again to
resume printing.
1. Slide the original
table to the left by pull-
ing up the original
table release lever.
Exchange the master
roll. (Refer to page 38
for details.)
Reset the original
table after replacing
the master roll.
49