Adjusting The Print Image Position; Shifting The Print Image Position Forwards Or Backwards - Ricoh DX 2330 Operating Instructions Manual

Adjusting the Print Image Position

After master making, you can adjust
the print image position to suit your
needs. There are two ways to do this:
❖ Shifting the Image Position Forwards
or Backwards
Adjust the image position using
the {Image Position} keys.
❖ Shifting the Image Position to the Right
or Left
Adjust the image position by shift-
ing the paper in the paper feed
tray.
Shifting the Print Image Position
Forwards or Backwards
* Paper feed direction
A
Press the left {Image Position} key
to move the image forwards, and
the right key to move it back-
wards.
Note
❒ When you shift the image for-
wards, leave a margin (more
than 5 mm, 0.2") at the leading
edge. If there is no margin, pa-
per might wrap around the
drum and cause a misfeed.
❒ The right or left {Image Position}
keys shift the image about 1
mm, 0.04" each time they are
pressed. However, the indicator
will only register a change
when the image position is
shifted about 5 mm, 0.2".
B
Press the {Proof} key to check the
image position.
GRFORW0E
BQA003S
Adjusting the Print Image Position
1
AQP004S
21