Ricoh PRIPORT VT2130 Operating Instructions Manual page 47

When
a
sheet of paper is misfed:
When two or
misfed:
more
sheets are
Remove the misfed
paper.
Remove the misfed
sheets.
1. -1
1 1.
2. If the feed roller pres-
sure lever is in the
standard position, set
it in the thick paper
position.
If the feed roller
pressure lever is in
the thick paper posi-
tion set it in the
standard position.
3.
3. Release the side plate
pads.
If the pad levers are
positioned to the
left, move them to
the right.
4.
5.
6.
If the separation
roller pressure lever
is in the thick paper
position, move it to
the standard posi-
tion.
If the separation roller
pressure lever is in
the standard position,
move it to the thick
paper position.
4.
Press the Reset key.
Press the Reset key.
5.
6.
Press the Print Start
key.
Press the Print
Start key.
To prevent paper feed jams:
Correct the curl. Curled paper. + , Paper edges ~ Shuffle the paper
stuck together
. Post card and
Set the printing speed
thick paper.
+ slower than step 3.
(See page 25.)