Miscellaneous; Operating Cautions - Ricoh PRIPORT VT2130 Operating Instructions Manual

I
MISCELLANEOUS
I
1. Operating Cautions
1.
2.
3.
4.
5.
6.
7.
8.
9.
If there is no blank area or a solid image area on the leading edge of
the original, create a blank area because the paper may wrap around
the drum or the paper eject pawl may become dirty and cause black
line on prints.
When the paper is curled, stack the paper with the curl face down,
otherwise the paper may wrap around the drum or stains may appear.
Make sure to make a few trial prints to check the image position
be-
cause the image position of the trial print
of the original.
If the image registration is not consistent,
than step 3.
may not correspond with that
set the printing speed slower
The leading edge of the prints may become stained if the edge touches
the image of prints on the paper delivery table.
In case of duplex or multicolor printing, leave the printed paper for a
while before the
next printing in
order to dry the ink on the printed
paper. If this is not done, feed roller marks will appear on the print
image.
If the machine is not used for a long period, the image
density may
decrease because the ink on the drum may dry. Make extra prints until
the image density recovers.
When the machine is used in
IOW
temperature conditions, the image
density may decrease. In this case, decrease the printing speed (1 or 2
steps).
The ink of the print on the paper delivery table may stick to the back
side of the next print.
54