Various Run Lengths Using The Same Master - Ricoh PRIPORT VT2130 Operating Instructions Manual

3. Various Run Lengths Using the Same Master
f Ill
I I
I
!lm
~(m,
[i]
Prcd
Pr,"t
start
19ci
1. Set one original on the original table.
2. Enter the number of prints for the first
run using the Number keys.
3. Press the Master making key. Check
the image position of trial prints. (See
page 19 to 20.)
4. Press the Print Start key.
5. Remove the prints from the paper
delivery table.
6. Press the Clear key to return the
counter to "O".
7. Enter the number of prints for the
second run using the Number keys.
8. Press the Print Start key.
9. Remove the prints from the paper
delivery table.
10. Repeat steps 6-9 until printing is com-
pleted.
34