Ricoh PRIPORT VT2130 Operating Instructions Manual page 53

1.
2.
Open the front cover
and replace the ink
cartridge. (Refer to
page 37 for the
details.)
Press the Reset key.
Ink is supplied to the
drum.
Press the Reset kev
again if the add ink in-
dicator does not turn
off.
3. When the add ink
indicator blinks
during repeat print-
ing, press the Print
Start key again to
resume printing.
. When the master eject box is full, do the following:
1. Open the master eject
container cover.
. Incomplete master eject box
installation.
1.
2.
3.
Open the master eject
container cover.
Reinstall the master
eject box.
Push the box so that
it is in contact with
the inside bracket.
Close the master
eject container cover.
No master
2.
3.
4.
Take out the
master eject box
and remove the
used masters.
Install the master
eject box and close
the master eject
container cover.
Press the Reset key.
eject box.
1.
2.
Open the master
eject container
cover.
install the master
eject box.
50