Ricoh PRIPORT VT2130 Operating Instructions Manual page 23

- Shifting the image to the right
m~m
— __ ._ __ .- _
- Shifting the image to the left
I
II
(
1.
2.
3.
1.
2.
3.
Press the
Lower Paper Feed Table
key.
Turn the side plate fine adjusting dial
as shown in the illustration.
.
You can shift the image position up to 10
mm from the center. Each division on the
scale is 2 mm.
Press the Proof key. Check the
image position again.
If the image position is not set correctly,
do steps 1 -3 again.
Press the
Lower Paper Feed Table
key.
Turn the side plate fine adjusting dial
as shown in the illustration.
. You can shift the image position up to 10
mm from the center. Each division on the
scale is 2 mm.
Press the
Proof
key. Check the
image position again.
. If the image position
do steps 1 -3 again.
20
is not set correctly,