2. Setting the Originals
I
1
J
1. Adjust the original guides to the size
of the original.
2. Insert the original face down on the
original table until it stops.
.
Only one original can be set at a time.
3. Select
the
image
Image Mode
keys.
.
Use the line mode
printed matter.
mode
using
the
when the original is
.
Use the photo mode when the original
contains photos or colored images.
The
line
mode is automatically
selected
when the main switch is turned on.
4.
If reduced
prints are desired,
set the
reproduction
ratio using the
Reduc-
tion
key.
.
The reduction ratio will change as follows:
93% -
75V0 +64%
11" x 17' original cannot be printed in
100% mode. Select 64Y0.
100%
mode
is automatically
selected
when the main switch is turned on.
16