Replenishing Supplies; Loading Paper - Ricoh PRIPORT VT2130 Operating Instructions Manual

REPLENISHING SUPPLIES
1. Loadina Pa~er
1. Press the Stop key.
.
This step is necessary only if you want
pause a print run to replenish paper.
2. Press the Lower Paper Feed Table
key.
The paper feed table will lower automat-
ically when the printing paper runs out.
When the paper feed table lowers, the top
sheet may remain between the feed
rollers. In this case, remove the top sheet
by hand.
3. Load paper on the paper feed table.
Release the
pads of the feed
side plates
before loading paper. Reset the pads after
paper is set.
4. Press the Print Start key to resume
printing.
36