9
Power Supply
9.1
Power Supply for the iTNC 530
The iTNC 530 is powered via a compact inverter, via the UV 1x0 power supply units or via
the UV 105 power supply unit.
Power is supplied through the 50-pin ribbon-cable connector X69 and in addition through a
5 V terminal on the CC 422.
For information on the HEIDENHAIN inverter units please refer to the service manual
"Inverter Systems and Motors".
July 2002
Note
Supply voltage and dc-link power are monitored.
See section "Integral Monitoring System" on page 7
9 – 165