Section 3: Setup; Unpacking; Needed For Setup; Inventory - Grizzly G0825 Owner's Manual

Portable edgebander
Table of Contents

Advertisement

Unpacking

This machine was carefully packaged for safe
transport. When unpacking, separate all enclosed
items from packaging materials and inspect them
for shipping damage. If items are damaged,
please call us immediately at (570) 546-9663.
IMPORTANT: Save all packaging materials until
you are completely satisfied with the machine and
have resolved any issues between Grizzly or the
shipping agent. You MUST have the original pack-
aging to file a freight claim. It is also extremely
helpful if you need to return your machine later.
SUFFOCATION HAZARD!
Keep children and pets away
from plastic bags or packing
materials shipped with this
machine. Discard immediately.

Needed for Setup

The following items are needed, but not included,
for the setup/assembly of this machine.
Description
Safety Glasses ........................................... 1
Straightedge 12" ......................................... 1
Screwdriver Phillips #2 ............................... 1
Hex Wrench 5mm ....................................... 1
Model G0825 (Mfd. Since 02/17)

SECTION 3: SETUP

Qty

Inventory

The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Box 1 (Figure 6)
A. Rolling Case ............................................... 1
B. Coil Support ............................................... 1
C. Edgeband Machine .................................... 1
D. Table Mounting Bracket .............................. 1
E. Cap Screws M6-1 x 20 ............................... 3
F.
Lock Lever M8-1.25 x 15 ............................ 1
G. Guide Plate ................................................. 1
H. Glue Pot Cover ........................................... 3
I.
Corner Guide Plate ..................................... 1
J.
Tap Screws M6 x 18 (not shown) ..............11
A
D
E
H
Figure 6. Inventory items.
Qty
B
C
F
G
I
-13-

Advertisement

Table of Contents
loading

Table of Contents