Empty The Printer Reject Tray - DataCard CR805 User Manual

Empty the Printer Reject Tray

The printer places rejected cards (unfinished cards or cards that were not processed properly) in
the reject tray. You should empty the reject tray whenever the retransfer film is replaced, or more
often depending on your procedures. Error message 242, "RT1 reject tray full," displays on the
LCD panel when the reject tray is full.
1.
Unlock the printer, if necessary, and open the printer access door.
2.
Remove the retransfer film cartridge from the
printer.
3.
Remove the rejected cards from the reject tray.
You do not need to remove the reject tray
from the printer. You can access the cards in
the tray when the retransfer cartridge is
removed.
4.
Replace the retransfer film cartridge in the printer.
5.
Close the printer access door and lock the printer.
Follow your organization's procedures to track the cards
removed and to dispose of them properly.
Note: If your system includes a laminator, the printer reject tray is not used. Cards
are placed in the laminator reject tray. Refer to
page A-11.
CR805 Retransfer Card Printer User's Guide
"Empty the Laminator Reject Tray" on
55