207: L2 Supply Out Or Missing; 208: L2 Supply Type Problem; 209: L2 Supply Not Supported; 210: L2 Supply Not Identified - DataCard CR805 User Manual

207: L2 supply out or missing

The laminator does not have usable supplies.
1.
Open the laminator.
2.
Replace the supply.
3.
Close the laminator.
On the PC, click OK, or click Cancel to cancel the card.

208: L2 supply type problem

The laminator cannot use the supply installed.
Use supplies designed for this laminator.
On the PC, click Retry, or click Cancel to cancel the card.

209: L2 supply not supported

The laminator cannot use the supply installed.
Use supplies designed for this laminator.
On the PC, click Retry, or click Cancel to cancel the card.

210: L2 supply not identified

The laminator cannot use the supply installed.
Use supplies designed for this laminator.
On the PC, click Retry, or click Cancel to cancel the card.

211: L1 heater problem

The laminator has encountered a critical error. The card will be canceled.
1.
Press the printer P
2.
Request service. The system must remain powered off.
On the PC, click OK to clear the message.

212: L2 heater problem

The laminator has encountered a critical error. The card will be canceled.
1.
Press the printer P
2.
Request service. The system must remain powered off.
On the PC, click OK to clear the message.
CR805 Retransfer Card Printer User's Guide
button to power off the system.
OWER
button to power off the system.
OWER
101