Clean And Replace The Fan Filter - DataCard CR805 User Manual

Clean and Replace the Fan Filter

The rear door fan provides ventilation to the interior of the printer and helps to cool the card
after the retransfer process. The fan contains a filter that helps prevent contaminants from
entering the printer. Clean the filter regularly, and replace it yearly, to make sure that the printer
continues to operate properly.
1.
Unlock the printer and open the printer
access door.
2.
Press the K3 rear access door release to
open the rear access door.
3.
Lift up and remove the filter from the fan
mount.
4.
Rinse the filter under running water and
shake it gently to remove excess liquid. Pat
it with a paper towel to remove additional
water.
5.
Allow the filter to dry completely.
6.
Insert the filter into the fan.
7.
Close the rear access door.
8.
Close the printer access door and lock the printer.
Make sure that you replace the fan filter yearly.
1.
Follow step 1
2.
Discard the used filter.
3.
Insert a new filter into the fan.
4.
Close the access doors and lock the printer.
56
through step 3 to open the printer and remove the fan filter.
System Maintenance