Clear A Card Jam In The K2 Vertical Transport - DataCard CR805 User Manual

6.
Lock the printer, if necessary.
7.
Press the U
HINTS & TIPS
Check the ink ribbon and retransfer film to make sure that they are not broken. Refer to
Broken Ink Ribbon or Retransfer Film"

Clear a Card Jam in the K2 Vertical Transport

The vertical transport houses the magnetic stripe module and smart card reader. If message
235: "K2 transport card jam" displays, you usually can resolve the error by pressing the U
button to move the card into the reject tray. If the error persists, do the following to remove the
card from the printer.
1.
Unlock the printer, if necessary, and open
the printer access door.
2.
Press the K3 rear access door release to
open the rear access door.
3.
Turn the K2 manual advance knob
counterclockwise to move the jammed
card inside the vertical transport until it is
accessible through the rear access door.
4.
Remove the card through the rear access
door.
5.
Close the rear access door.
6.
Close the printer access door and lock the
printer.
7.
Press the U
the message.
CR805 Retransfer Card Printer User's Guide
button on the printer to clear the message.
SER
button on the printer to clear
SER
on page 77.
K2 Manual
Advance Knob
K3 Rear Access
Door Release
"Repair a
SER
75