242: Rt1 Reject Tray Full; 243: Card Lost; 245: Configuration Error; 275: Multi-Hopper Error - DataCard CR805 User Manual

242: RT1 reject tray full

The reject tray is full.
1.
Open the printer access door.
2.
Remove the retransfer film cartridge.
3.
Remove the rejected cards.
4.
Replace the retransfer film cartridge.
5.
Close the printer access door.
Press the U
SER
cancel the card.

243: Card lost

A card that is expected to be in the printer is no longer present. The card will be canceled and
added to the Lost Cards count. Send the job to print again.
Press the U
SER
cancel the card.

245: Configuration error

The configuration is not compatible with the printer model. The printer cannot print cards until
the configuration issue is corrected. Contact your service provider for assistance.
Click OK on the PC to clear the message.

275: Multi-hopper error

The multi-hopper has encountered a critical error. The card will be canceled.
1.
Press the printer P
2.
Press the P
If the error occurs again, request service.

276: Multi-hopper card jam

The multi-hopper did not move a card into the printer.
Press the U
SER
CR805 Retransfer Card Printer User's Guide
button on the printer to clear the message. On the PC, click OK, or click Cancel to
button on the printer to clear the message. On the PC, click OK, or click Cancel to
button to power off the printer.
OWER
button again to power on the printer.
OWER
button to clear the error. If a card was jammed, it is moved to the reject tray.
97