DataCard CR805 User Manual page 135

4.
Remove the protective paper from both sides of the double-sided, sticky cleaning card and
insert the card under the rollers of the card exit slot of the laminator. When it is in the correct
location and pushed in far enough, the card stays in place.
5.
Use the LCD menu system to start the cleaning cycle.
a.
Begin when the printer displays Ready and the U
shows steady green. Press the U
Suspended displays on line 1 of the LCD panel.
b.
Press E
c.
Maintenance displays on line 2 of the LCD panel. Press E
to enter the Maintenance menu.
d.
Cleaning Card displays on line 2 of the LCD panel. Press
E to enter the Cleaning Card menu.
NTER
e.
Printer displays on line 2 of the LCD panel. Press the down
arrow.
CR805 Retransfer Card Printer User's Guide
to enter the menu system.
NTER
button
SER
button.
SER
NTER
A-13