Chapter 2: About The Printer; About The Cr805 Retransfer Card Printer - DataCard CR805 User Manual

Chapter 2: About the Printer

About the CR805 Retransfer Card Printer

The CR805 Retransfer Card Printer uses retransfer technology to produce high-quality, over-the-
edge printing on a variety of PVC and non-PVC card materials. The retransfer process provides a
reliable print quality on card surfaces that have minor variations, such as those due to smart chips
or RFID antennas embedded in the card.
The retransfer printing process uses two types of supply: a color pigment ink ribbon and a
retransfer film. Heat from a thermal printhead causes the ink pigment to release from the ribbon
and adhere to the retransfer material. The film is then bonded to the card using a heat and
pressure process that also applies the film to the edges of the card.
The printer supports several types of color ink ribbon. The ribbon typically contains the following
panels: cyan, magenta, yellow, black, and primer (CMYKP). Ink ribbons also may include an
inhibitor panel that prevents any ink or retransfer material from being applied to areas of the card
that have a magnetic stripe or signature panel, or an ultraviolet fluorescent (F) panel. Refer to the
printer's Installation and Administrator's Guide for a list of ink ribbons available for the printer.
The printer prints at a resolution of 600 x 600 dpi. It can print on one side or both sides of the
card. It also can encode data on a magnetic stripe or a smart card chip. Magnetic stripe and
contact or contactless smart card capabilities are optional.
The printer also has the ability to apply two layers of the retransfer film on the front side or on
both sides of a card, for added durability.
A 125-card input and 25-card output hopper are standard. A 125-card output hopper is available
and can be installed without tools. In addition, an optional multi-hopper with six input hoppers,
each with a 125-card capacity, is available.
An optional laminator also is available when you purchase your printer, or as a field upgrade
(refer to Appendix A: "CLM
Refer to "Printer Configuration Label"
factory-installed options in the printer.
CR805 Retransfer Card Printer User's Guide
Laminator".)
on page 12 for more information about identifying the
3